BelloCell-500AP

BelloCell-500AP

 

  •    Productivity: up to 109 cell/bottle
  •    Designed for regular incubator and long-term cell culture
  •    Facilitate cell seeding, virus infection, transfection, and cell harvest
  •    Non-pyrogenic, non-cytotoxic
  •    Pre-sterilized (gamma-irradiated) and ready-to-use

Trade Description

Product Feature

High-density Cell Culture System for Research & Development
 
  •    Productivity: up to 109 cell/bottle
  •    Designed for regular incubator and long-term cell culture
  •    Facilitate cell seeding, virus infection, transfection, and cell harvest
  •    Non-pyrogenic, non-cytotoxic
  •    Pre-sterilized (gamma-irradiated) and ready-to-use
 
BelloCell-500AP bottle combines BelloCell-500A and BelloCell-500P designed for automatic medium recirculation as well as easy seeding / inoculation in the process of cell culture. The upper tubing (inlet) and lower tubing (outlet) of BelloCell-500AP connect to the external medium bottle (2 L) for medium replenishment. In addition, when inverting the bottle after replacing the vented cap with non-vented cap, BioNOC II matrices with the medium are restricted in a narrower space in the non-vented cap, leading to relatively higher matrix (or cell) density for cell seeding, virus inoculation, or trypsinization of cells.
One BelloCell-500AP bottle is equivalent to dozens of roller bottles. It is applicable in seeding, binding assay/ human proteome/new drug discovery, virus production, recombinant protein production/ monoclonal antibody production, transient transfection, and tissue engineering.
 
Check other products of the BelloCell family on the right for your specific application.


Specification:
BelloCell-500AP
Function
For culture of anchorage-dependent cells
Dimension
100 (ψ) × 243 (h)mm
Working Volume
500 ml
Material
PETG, LDPE/EVA, PP
Cap Type
Vented screw cap
Vent Filter
0.22 μm PTFE membrane
Additional Cap
Non-vented screw cap
Port
Inlet: 10 cm silicon tubing with female luer
Outlet: 10 cm silicone tubing with male luer
Carrier Quantity
865 pc (±5%) BioNOC II, ~5.5 g
Growth Area
>15,600 cm2
Sterilization
Gamma irradiated
Cell Line
CHO, BHK, VERO, HEK-293, Sf-9, PK, Hi-5, HeLa, ST, 3T3, MDBK, C-127, MDCK, Huh7, RK-12, Hybridoma, Primary cell
Storage
RT
Shelf Life
2 years
 
 
 
Principle:
 
The principle of BelloCell-500AP is to immobilize cells onto the BioNOC II matrices packed in its upper chamber. By compressing and decompressing the bellow of BelloCelll-500AP by BelloStage machine, the culture medium inside rises and descends, submerging and exposing matrices periodically. During aeration, cells attached to porous matrices are exposed to the air through a thin liquid film. In the submerging phase, cells are in direct contact with the fresh medium for up-taking nutrients while metabolic waste can be diffused as well as CO2 can be exhausted efficiently. The concept of the design is to solve problems (shear stress, limited oxygen supply, and low cell density) frequently occurring on the commercial models, and to simplify the operation.
 

Performance:
 
BelloCell-500AP
Output
Up to 109 cells
Shear Stress
Low
Foaming
No
Cell Doubling Time
Shorter
Direct Cell Count
Yes
CPE Observation
Yes
Cell Harvest
Yes
Extra Medium Supply
Yes
Extra Benefit
Ø   Localize cell and thus increase cell adherence efficiency
Ø   Increase cell-to-virus contact for infection or chemical-based transfection
Ø   Save enzyme for cell detachment from the matrix
Ø   Suitable for slowly adherent cells
Ø   Suitable for transit transfection application
Ø   Resemble to the operation of TideCell. A good model before up-scale to TideCell.
 
 
 
Resource:
1.          Product Introduction
3.          All BelloCell Selection Guide
4.          Reference
5.       Q&A
Order Information:
Product
Cat. No.
Availability
BelloCell-500AP Bottle, 4 bt/cs
BCA01000
In Stock
BelloCell Continuous System Complete Set
Ø   BelloStage-3000 Control Panel x 1 set
Ø   Control Box x 1 set
Ø   Forceps x 2 pc
Ø   CVD kit (50 ml) x 1 bt
Ø   Ball Screw Grease (SR-1) x 5 ml/bt
Ø   BelloFeeder-1400 Pump Set x 1 set
Ø   Tubing Complete Set x2 set
Ø   GlucCell Glucose Monitoring System x 1 set
BCS07000
In Stock
BelloFeeder-1400 Pump Set, 1pc/set
BCA01400
In Stock
Tubing Complete Set
Ø   Silicone Tubing Set x 1 set
Ø   PP Pump Head x 1 pc
Ø   GL45 Stainless Head Plate x 1 pc
BCA01301
In Stock
Disposable Silicone Tubing Accessory, 5pc/bx
BCA01302
In Stock
Disposable Silicone Tubing Set & Pump Head
Ø   Tubing Set x 1 set
Ø   PP Pump Head x 1 pc
BCA01303
In Stock
GL45 Stainless Head Plate, 1pc/pk
BCA02005
In Stock
Forceps , 25 cm, 1pc/pk
BCA02000
In Stock
Crystal Violet Dye Nucleus Count Kit, 100 ml/bt
BCA02001
In Stock
BelloCell Filtered Cap, 6 pc/cs
BCA02003
In Stock
Non-vented Cap, 8 pc/pk
BCA02004
In Stock
BelloCell-500A Strainer, 1 pc/pk
BCA01206
In Stock